RME Filters, Inc. - EMI Filters - Your source for equipment filters, signal line filters, power supply filters, system filters, facility filters, filter assemblies, RLC networks, designs based on MIL-F-15733; RF Filters ... high pass, low pass, band pass, band reject, designs based on MIL-F-18327 Microwave Components ... directional couplers, power dividers, RF switches, phase shifters, attenuators, and dummy loads

RME

RME Filters, Inc.

Call:	603-595-4573
FAX:	603-881-7649

About Us
Contact Us
Quality Policy
ISO 9001:2000

Home

Product List

EMI Filters
RF Filters
Microwave

EMI Filters
RME Filters, Inc. designs and manufactures a broad line of EMI filters. Many of our designs are based on MIL-F-15733 specifications.

EMI filters are electromagnetic devices that eliminate or reduce unwanted RF noise and interference. EMI Filters have many applications, including equipment filters, signal line filters, power supply filters, system filters, and facility filters. We also manufacture filter assemblies and RLC networks.

Military Grade Filters
designed and tested to the requirements of MIL-F-15733

move your mouse over the thumbnail to see a full-size image Part Number Ratings Performance Configuration

RME-F-0003 115 VAC, 60 Hz
3 phase delta
2.0 Amp 25 dB @ 1.0 MHz
40 dB, 10 – 100MHz 3.00 x 2.69 x .87
input: DBMM-5W5P
output: solder lugs

RME-F-0060 60 A, 28 VAC, 400 Hz
20 A, 28 VDC
2 x 10 A, 200 VDC cap: 0.5 uF
300 uF; ind: 34 uH
cap: 1500 pF 2.50 x 2.50 x 1.47
MS17348R24C12P
Output: 10-32 studs

RME-F-0204 115 VAC, 400 Hz
3 phase delta
1.75 Amp 24 dB @ 150 kHz
43 dB @ 1.0 MHz
20 dB 20 – 25 MHz 1.83 x .89 x 1.23
.040 dia pin terminals

Signal Line Filters
for multiple circuit applications

move your mouse over the thumbnail to see a full-size image Part Number Ratings Performance Configuration

RME-F-0093 10 x 7.5 Amp
100 VDC Cap: 1750 pF, min.
(M15733/33-0001) 1.52 x 1.52 x 1.42
MS3474L14-19S

RME-F-0121 29 x 2300 – 5000 pF
10 x 500 – 1300 pF
200V, 5A, DC-400 Hz
10 feed thru; 8 gnd 60 dB, .60 – 10 GHz
50 dB, 1 – 10 GHz MIL-C-81659/35
Filter incorporated into “A” insert
.030 dia. pins out

RME-F-0399 17 x 7.5 Amp
100 VDC Cap: 1750 pF, min.
(M15733/33-0001) 1.52 x 1.52 x 1.42
MS3474L14-19S

Power Input Filters
for equipment, subsystems and power supplies

move your mouse over the thumbnail to see a full-size image Part Number Ratings Performance Configuration

RME-F-0029 125 VAC, 5 Amp
DC – 400 Hz 90 dB, 1 – 10 MHz
80 dB, .5 – 1000 MHz 2.50 x 2.00 x 1.25
input: IEC conn.
output: solder lugs

RME-F-0205 115 VAC, 400 Hz
3 phase
2 Amp 20 dB @ 100 kHz
33 dB @ 2.0 MHz 2.50 x 2.00 x 2.125
M83723-02R-1405N
out: .040 dia. pins

RME-F-0351 115 VAC, 60 Hz
2 x 3.5 Amp 25 dB @ 1 MHz
40 dB, 10 – 100 MHz 2.88 x 2.00 x 1.75
in: MS3402D20-4P
out: 18 AWG leads

Tubular Filters
for feed-thru filter performance up to 10 GHz

move your mouse over the thumbnail to see a full-size image Part Number Ratings Performance Configuration

RME-F-0047 600 VDC
250 VAC, 60 Hz
5.0 Amp 100 dB @ 1.0 MHz
80 dB, 10 – 400 MHz 1.250 dia. x 3.44 long
wire leads with lugs
7/16-20 thd. neck

Filter Assemblies and RLC Networks

move your mouse over the thumbnail to see a full-size image Part Number Ratings Performance Configuration

RME-F-0154 270 V, 50 – 60 Hz
130 V, 400 Hz
50 Amp MIL-STD-462 LISN
10 kHz – 10 MHz
IND: 50 uH 12.0 x 8.0 x 10.0
term. accept 8 AWG
RF input: N conn.

Military Grade Filters designed and tested to the requirements of MIL-F-15733
move your mouse over the thumbnail to see a full-size image	Part Number	Ratings	Performance	Configuration
	RME-F-0003	115 VAC, 60 Hz 3 phase delta 2.0 Amp	25 dB @ 1.0 MHz 40 dB, 10 – 100MHz	3.00 x 2.69 x .87 input: DBMM-5W5P output: solder lugs
	RME-F-0060	60 A, 28 VAC, 400 Hz 20 A, 28 VDC 2 x 10 A, 200 VDC cap:	0.5 uF 300 uF; ind: 34 uH cap: 1500 pF	2.50 x 2.50 x 1.47 MS17348R24C12P Output: 10-32 studs
	RME-F-0204	115 VAC, 400 Hz 3 phase delta 1.75 Amp	24 dB @ 150 kHz 43 dB @ 1.0 MHz 20 dB 20 – 25 MHz	1.83 x .89 x 1.23 .040 dia pin terminals

Signal Line Filters for multiple circuit applications
move your mouse over the thumbnail to see a full-size image	Part Number	Ratings	Performance	Configuration
	RME-F-0093	10 x 7.5 Amp 100 VDC	Cap: 1750 pF, min. (M15733/33-0001)	1.52 x 1.52 x 1.42 MS3474L14-19S
	RME-F-0121	29 x 2300 – 5000 pF 10 x 500 – 1300 pF 200V, 5A, DC-400 Hz 10 feed thru; 8 gnd	60 dB, .60 – 10 GHz 50 dB, 1 – 10 GHz	MIL-C-81659/35 Filter incorporated into “A” insert .030 dia. pins out
	RME-F-0399	17 x 7.5 Amp 100 VDC	Cap: 1750 pF, min. (M15733/33-0001)	1.52 x 1.52 x 1.42 MS3474L14-19S

Power Input Filters for equipment, subsystems and power supplies
move your mouse over the thumbnail to see a full-size image	Part Number	Ratings	Performance	Configuration
	RME-F-0029	125 VAC, 5 Amp DC – 400 Hz	90 dB, 1 – 10 MHz 80 dB, .5 – 1000 MHz	2.50 x 2.00 x 1.25 input: IEC conn. output: solder lugs
	RME-F-0205	115 VAC, 400 Hz 3 phase 2 Amp	20 dB @ 100 kHz 33 dB @ 2.0 MHz	2.50 x 2.00 x 2.125 M83723-02R-1405N out: .040 dia. pins
	RME-F-0351	115 VAC, 60 Hz 2 x 3.5 Amp	25 dB @ 1 MHz 40 dB, 10 – 100 MHz	2.88 x 2.00 x 1.75 in: MS3402D20-4P out: 18 AWG leads

Tubular Filters for feed-thru filter performance up to 10 GHz
move your mouse over the thumbnail to see a full-size image	Part Number	Ratings	Performance	Configuration
	RME-F-0047	600 VDC 250 VAC, 60 Hz 5.0 Amp	100 dB @ 1.0 MHz 80 dB, 10 – 400 MHz	1.250 dia. x 3.44 long wire leads with lugs 7/16-20 thd. neck

Filter Assemblies and RLC Networks
move your mouse over the thumbnail to see a full-size image	Part Number	Ratings	Performance	Configuration
	RME-F-0154	270 V, 50 – 60 Hz 130 V, 400 Hz 50 Amp	MIL-STD-462 LISN 10 kHz – 10 MHz IND: 50 uH	12.0 x 8.0 x 10.0 term. accept 8 AWG RF input: N conn.